The Kartik Steels plant is situated in SIPCOT Ranipet, Tamil Nadu, with a sprawling layout of 6.0 acres. It has a full-fledged infrastructural set-up. Our foundry has recently undergone an expansion and also modernization with facilities of 3000 KGs, 1500 KGs, 2 x 250 KGs, and 150 KGs crucibles and with a constructed area of more than 8000 sq.ft. with various handling facilities such as over-head cranes of capacities 10 MT, 4 MT and 3 MT.

The moulding section has facilities for machine moulding, hand moulding and cake moulding. Heat treatment of the castings is done in a heat treatment furnace with an automatic recorder and controller. With adequate facilities, the castings are then fettled to required finishes.

Thus Kartik Steels is in a position to produce castings from 1 Kg up to 3.6 M tone weight and to serve a multi-faceted spectrum of applications. The Unit is also equipped with Centrifugal Casting Machines to make Balls for Ball Values, Seat Rings and Flanges up to weight of 250 Kgs.

Manufacturing Facilities

Inductotherm make 750 KW, medium frequency, coreless Induction Melting Furnace 3 Ton Capacity with additional crucible for 1.5 Tons with provision for dual track.
Pillar make medium frequency coreless Induction Furnace with 3 Crucibles of 250 Kgs, 250 Kgs & 150 Kgs Capacity
6000 Kgs Capacity Crane weighing machine digital type to weigh liquid metal.
Ladles of various capacities up to 5 Ton
Immersion Pyrometer with recorders for temperature measurement
WHPL 3 Westerwork make pin lift 10” draw Jolt-sqeeze - Moulding Machines
Vertical Centricast machine
500 Kgs Capacity , pan Dia 1600mm batch type sand muller
250 Kgs Capacity pan Dia 1200mm batch type sand mixer
Smaller Mullers and Mixers
5 Ton per Hour Capacity Rotary sand drier
10 Ton Capacity double Girder Cabin operated EOT Crane
4 Ton Capacity double Girder Cabin operated EOT Crane
3 Ton double Girder Cabin operated EOT Crane.
Facility for Green Sand, CO2, No-bake and resin bonded sand moulding.
Weigh bridges and machines of various capacities (50 Kgs, 300 Kgs, 3000 Kgs)
Welding Machines with Gouging facility
Wheelabrator make 2000mm Dia single rotary table shot blast machine
Flexible shaft grinders
400mm Dia wheel Capacity 10 HP Swing frame Grinders
2Mx1Mx1.37M Ht Electrically Operated Ceramic Lined, Bogie hearth Heat Treatment Furnace KSM Make with Water quenching facility & 2 Point recorder.
300 CFM Double Stage Air Compressor
300 CFM Diesel Screw Compressor
64 CFM Capacity Compressor
320 KVA Genset
Pattern making facilities